After pouring and spreading Glaze Coat on the top surface, allow it to flow over the edges (if coated edges are desired).  Use an inexpensive foam or paint brush and work it lightly back and forth along the edges until the drops are smoothed out evenly.  Recheck for drips after approximately 15 and 30 minutes.   At 12 – 24 hours after you poured, take a thin bladed knife or razor blade and trim the little ‘icicles” that will have formed from the dripping so that the bottom side is level.  The “icicles” can also be sanded off after Glaze Coat has completely cured.