Glaze Coat can be used with molds or forms to build up a thicker pour and create an edge-less surface.  Products such as melamine boards, silicone molds, Tuck^® Tape, and Tyvek^® Tape will not stick to Glaze Coat and allow for easy removal after the epoxy has cured.  Melamine is a board-sheet available at hardware stores and is able to be cut to create a frame.  When tape is used apply the tape with the sticky side away from the Glaze Coat.  Ensure the mold is completely sealed so that no Glaze Coat can escape.

Do not pour more than 1/8" thick in an application.  Additional layers may be applied every 4-5 hours, allowing a 24 hour cure if exceeding more than 3 coats.